It is used on inner surfaces of building elements such as coating, exposed concrete, brick, wallpaper, chipboard,…
Get More DetailsFields Of Use
Waterproofing
Su ve nem geçirmezlik istenilen yapılarda, beton sıva, tuğla gaz beton, ahşap, çatı kaplamalarında, teraslarda ve su depolarında kolaylıkla ve güvenle uygulanır.
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Waterproofing
FIELDS OF USE
It is applied easily and safely in concrete constructions, brick, aerated concrete, wood, roof coverings, terraces and water tanks where water and moisture impermeability is required.
PROPERTIES
The product includes fiber. It does not contain tar, asphalt or solvent. It is an elastic and decorative liquid membrane waterproofing material.
Appearance: Flat appearance
Chemical Structure: Styrene acrylic copolymer emulsion and plasticizer combination
Thinner: Water
Ph: 8-9
Recommended Application: 3 coats.
Drying period: Initial drying at room temperature 12, full drying 24 hours (These times may vary depending on air temperature, application thickness, surface moisture and ambient temperature.)
Application surfaces should be removed from all kinds of foreign materials such as dirt and dust. The surface should be dry and clean. Primer should be applied to the prepared surface as the first coat. After the Primer dries, waterproofing should be applied as 2 or 3 coats without thinning. Application should be done in crosses by waiting for 24 hours between each coat.
In a single coat for horizontal applications 1-1,5 kg/m2, vertical applications 0.800-1 kg /m2. (Consumption rates are approximate figures and may differ depending on the mesh structure of the surface.)
Storable for 2 years in cool and dry places away from direct sunlight between -5 and +30 °C with the lid tightly closed. Avoid freezing.
20 kg, 10 kg, 3,5 kg, 1 kg plastic bucket
White
Related Products
It is used on plaster, exposed concrete, brick, aerated concrete, previously painted surfaces and mineral plaster surfaces.
Get More Details
It is used as Primer on all mineral surfaces; gypsum surfaces; surfaces previously painted with water or…
Get More Details
It is used as a primer on plaster, exposed concrete, chipboard, brick and concrete pan, mineral based…
Get More Details