Flora Silicone Exterior Paint

Fields Of Use

Konvansiyonel sıva, brüt beton, tuğla, gaz beton, tarak beton, eski boyalı yüzeyler ve mineral sıvalı yüzeylerde kullanılır.

Share this product

Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.

Flora Silicone Exterior Paint

FIELDS OF USE

It is used on inner surfaces of building elements such as coating, exposed concrete, brick, wallpaper, chipboard, plaster, plaster board and etc.

PROPERTIES

Flora Export is silicone based. It is water based and it has high breathing capability. It has been formulated to have a high level of hiding power and easy applicability. It does not crack, blister or fall off. Colors do not fade and white bears a high level of whiteness.

TECHNICAL SPECIFICATIONS

Appearance: flat, smooth
Chemical Structure: Acrylic copolymer emulsion
Density: 1.75 gr/cm³
Viscosity: 120 KU -125 KU at 25°C
Thinner: Water
Ph: 8-9
Solid Matter Quantity: 75% – 80%
Recommended Application: 2 Coat
Drying Period: Full drying period is max. 24 hours, waiting period between coats is min. 2 hours
Gloss: semi flat
The Largest Particle Size: thin
Opacity: Class 1 (4 m²/L)
Wet Scrub Resistance: Class 4

APPLICATION

Surfaces to apply Flora Export paint should be endurable, dry, clean and able to carry the paint. Cracked or damaged surfaces should be fixed before application. High absorbent surfaces to be painted for the first time such as mineral based plaster, shall be undercoated with Kardelen Insulated Primer. Application surfaces and ambient temperature should be between at least 5°C. Flora Export can be applied with rolls and or brushes.

THINNING

It is recommended to thin at a ratio of 10% – 25% depending on surface conditions with clean water including no other solvent or foreign material; and apply two coats of paint.

CONSUMPTION

Depending on absorption properties of the surface, with 1 kg Flora Export Paint 8 – 10 m² area, and with 1 lt Flora Export Paint 10-14 m² area can be painted.