Acrylic Exterior Primer

Fields Of Use

Sıva, brüt beton, sunta, gaz beton, tuğla ve betopan, mineral esaslı ve çok emici yüzeylerde ilk defa yapılacak boya uygulamalarından önce astar olarak kullanılır.

Share this product

Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.

Acrylic Exterior Primer

FIELDS OF USE

It is used as an Primer on plaster, exposed concrete, chipboard, aerated concrete, brick and concrete pan, mineral based and high absorbent surfaces prior to paint application for the first time.

PROPERTIES

With its water-based formula, it provides a bridge between paint and surface and reduces paint consumption. Due to its high micron and special fillings, it provides a stable surface for the finish. It prevents an incorrect absorption of the next paint. It prevents formation of algae and bacteria. It prevents deforming and swelling of the paint because of carbonates formed on the surface of fresh concrete.

TECHNICAL SPECIFICATIONS

Appearance: Flat
Chemical Structure: Acrylic copolymer and silicone emulsion
Viscosity: 115 KU -120 KU at 25°C
Thinner: Water
Ph: 8-9
Solid matter quantity: 60% –65%
Recommended Application: Single coat
Drying period: Full drying period is max. 24 hours, waiting time between the coats is min. 6 hours.

APPLICATION

Application surfaces should be durable, dry, clean and able to carry the paint. Applied as single coat with a brush or roll. Surface and ambient temperature during the application should be between 5°C and 30°C.

THINNING

It is recommended to thin at a ratio of 10-20% depending on surface conditions with clean water including no other solvent or foreign material; and applied a single coat.